Please contact us first. In some cases, we can deliver the product in a few days by trimming down the content of the analysis.

It depends on the contents of the case and analysis.
The price for companies in general is about $3,500 for small-scale analysis and about $7,500 for complex analysis.
Prices for university researchers range from $800to $3,500.

Basically, we only sell software and contracted analysis at a fixed price, but depending on the analysis, we may be able to offer a discount by reducing man-hours, so please contact us first.

It usually takes about a month for each case to be completed. If you are in a hurry, please contact us first to see if we can make it to you in time.

The following data is required
• Contrast-enhanced CT (DICOM format, thin slice)

The following data is required.
• Contrast-enhanced CT (DICOM format)

The following data will be required.
• Contrast-enhanced CT (DICOM format)
• Patient's body surface area

The following data will be required.
• Contrast-enhanced CT (DICOM format)
• AA/AS information
• Patient's body surface area

The following data will be required.

• Contrast-enhanced CT (DICOM format)
• left and right lung resistance (approximate left and right PA flow ratios, etc. are also acceptable)
• Patient's body surface area.

Please contact us first for a discussion.

The analysis process includes:
1. Online meeting for a discussion and estimate.
2. Creating a virtual surgery arterial shape.
4. Computer simulation to calculate blood flow in the virtual vessel.
5. Report on the analysis.

First of all, please contact info@dev.cfd.life about the analysis contents. The steps are the following
1. Consultation and quotation by email or online meeting
2. Order
3. Sending the necessary data and analyze
4. We send a report

All you need to know is the shape of the vessel and the flow rate, and we will analyze each case manually, so we can use a variety of inputs such as CT, MRI, CAD models and drawings.
For analysis of actual cases, it is common to use CT for analysis.

The ability to accurately extract the shape of a vessel is important in CFD, and as a guide to image quality, the outline of a narrowed coronary artery must be visually identifiable.
Even if the image quality is poor, it is possible to modify the image based on the angiogram, so it is highly likely that analysis is possible even with an older 64-row device, for example.

We can provide virtual surgery technique that will provide useful information for comparing blood flow in multiple surgical techniques.

Please contact us for and we will introduce you to an introduction to Dr. Itatani. (Our software and services are for research purposes only, not for medical equipment, and we are not able to provide information on decision making in practice.)

We only provide contract analysis for simulations, which are custom-made, where a model is created for each customer's purpose, one by one. Numerical fluid dynamics simulations are technically difficult to perform, so our fluid dynamics experts analyze each case manually in order to provide a highly reliable analysis.

Blood flow in the heart and near the valves are also suited for 4D flow MRI because structures such as valves and heart walls have a significant impact on flow.
Our team can calculate energy loss and wall shear stress.
If CFD Simulation is based on CT, the valve and endocardial lumen movement cannot be calculated.

Echo VFM is currently not available for analysis on any device except GE.

Echo VFM is currently not available for analysis on any device except GE.

The output of the analysis results in iTFlow is:

Still image: PNG
Video: Sequentially numbered PNG images and WMV, MPEG4
Graphs, etc.
Quantitative values: Text (CSV)
This is the basis of the system. As for the output format, we can modify it to fit your hospital's system, so please contact us for more information.

Minimal:
OS: Windows 10 64 bit (Japanese or English)
Monitor resolution: Full HD (1920 x 1080 pixels) or higher
Interface: mouse with wheels.

Recommended:
CPU: Intel(R) Core (TM) i7-9700 or more,
Memory: 8GB or more

You are free to use the information on our web pages. If you need additional data, please feel free to contact us.

It is possible. Please email us at info@dev.cfd.life.

Please feel free to contact us. We will discuss with you whether we can develop a software that meets your needs.

As for iTFlow (4D Flow MRI), you can analyze samples data on a trial basis. We will send you a video of the analysis without quantitative values. Please send us a complete set of data, and we will select the most suitable ones for analysis.

CFD, however, is not available for trial analysis due to the high cost of licenses for supercomputers and numerical analysis software.

4D Flow MRI, simulation or Echo VFM can be used. However, simulation is the most accurate method to measure wall shear stress.

It is possible to visualize eddy currents created in Valsalva sinus as well as quantification of flow velocities. Simulation or 4D Flow MRI is suitable for this.

We have experience in using simulations and MRI to evaluate medical devices. Please contact us so that we can discuss about the most appropriate evaluation method.

There are two methods for carotid artery blood flow analysis: CFD and 4D Flow MRI.

CFD can be done with either CT or MRI as long as the 3D geometry of the vessel is available, so either CT or MRI can be used as long as the vessel geometry can be accurately grasped.
Although contrast enhanced images are easier to analyze, in many cases it is possible to analyze a simple vessel if the exact shape can be determined visually.
If you send us the data, we will verify that it can be analyzed.

4D Flow MRI is an MRI imaging method that allows you to capture blood flow velocity directly on MRI and WSS and flow rate can be measured in the same way as CFD.
Please note that data 4D Flow MRI sequence is required.

Flow rate, flow velocity map, energy loss, pressure map (CFD), vorticity, wall shear stress, oscillatory shear index and helicity are major hemodynamic parameters calculated in flow analysis. If you need additional parameters, please send us references and we will calculate them.

Aortic diseases can be analyzed by both 4D Flow and CFD. However, in aortic dissections where flap movement affects blood flow, flap movement cannot be calculated by CFD, so it is a limitation. CFD is recommended if you want to perform virtual surgery, otherwise 4D Flow is the best choice.

In the case of small diameter vessels, the simulation scenario is more suitable. We will offer the most appropriate method according to the purpose of the analysis and the data we have, so please contact us first.

Indeed, three methods of analysis are possible: 4D Flow MRI, Echo and simulation.
The aortic arch has its own characteristics, such as accelerated blood flow, spirals, and reverse flow, that can be visualized and quantified.
We can also visualize the energy loss caused by turbulence, the appearance of blood flow colliding with the wall as a vector and measure the Wall Shear Stress caused by the collision.

As for the evaluation of the coronary arteries, it is difficult to capture images with 4D Flow due to its size, so it is better to use CFD from coronary angiography CT. However, it is still possible to calculate wall shear stress, flow and pressure in each branch. Virtual surgery is also possible, so it is possible to predict the differences in graft design.

It is possible. Energy loss and flow rate are analyzed in two-dimensional units.

Since the analysis results are limited to 2-dimensional cross-sections, the desired analysis results cannot be obtained if the characteristic flow, for example, the central axis of the stenotic jet is not captured in the cross-section.
On the other hand, it takes less time for acquisition.

Prices vary depending on the type of license. Please contact us to get a quote for your requirements.

It is expected to be available soon as a beta feature in development.

It is available. We will be happy to meet with you online and explain how to install and use it. Please contact us at info@dev.cfd.life.

We will send you information on the recommended imaging methods. Please contact us at info@dev.cfd.life.
We provide support for the all the MRI maker according to recommended imaging methods.

The following conditions are recommended for cardiac imaging:
• Sagital
• Venc is 1.5 ~ 2.0m/s
• 4D Flow and Cine images for segmentation.
• Slice width: 4mm max
• More than 15 phases per cardiac cycle

Minimum:
OS: Windows 10 64 bit (Japanese or English)
Monitor resolution: Full HD (1920 x 1080 pixels) or higher
Interface: Mouse with wheels

Recommended:
CPU: Intel(R) Core(TM) i7-9700 or higher
RAM: 16GB or higher
GPU: NVIDIA GeForce GTX 1660 or higher

Analysis speed is CPU-dependent and less RAM means less stability.
We can also provide you an estimate for a recommended PC.

It is possible. If you have any concern, please tell us and we will check the compatibility. We will adapt the software for a better compatibility with your data.

Our iTFlow is unique in its ability to track and analyze beats without contrast. It can also calculate various hemodynamic indices based on fluid analysis techniques.

Demo and trial versions are available. We will support you in the interpretation of blood flow. In addition to 4D Flow MRI, we also provide comprehensive support for CFD and other methods of blood flow analysis, so please feel free to contact us if you have any technical problems.

It is possible to measure the average, maximum, and minimum values of stress in the measured area by enclosing it on the 3D screen.
It is also possible to draw the WSS in a cardiac cycle change’s graph.

4D Flow MRI data can be analyzed to visualize streamlines and pathlines, assess flow rates, measure cardiac volumes, measure energy loss, and analyze stress on the wall.

Please contact us first. In some cases, we can deliver the product in a few days by trimming down the content of the analysis.

It depends on the contents of the case and analysis.
The price for companies in general is about $3,500 for small-scale analysis and about $7,500 for complex analysis.
Prices for university researchers range from $800 to $3,500.

Basically, we only sell software and contracted analysis at a fixed price, but depending on the analysis, we may be able to offer a discount by reducing man-hours, so please contact us first.

It usually takes about a month for each case to be completed. If you are in a hurry, please contact us first to see if we can make it to you in time.

The following data is required
• Contrast-enhanced CT (DICOM format, thin slice)

The following data is required.
• Contrast-enhanced CT (DICOM format)

The following data will be required.
• Contrast-enhanced CT (DICOM format)
• Patient's body surface area

The following data will be required.
• Contrast-enhanced CT (DICOM format)
• AA/AS information
• Patient's body surface area

The following data will be required.

• Contrast-enhanced CT (DICOM format)
• left and right lung resistance (approximate left and right PA flow ratios, etc. are also acceptable)
• Patient's body surface area.

Please contact us first for a discussion.

The analysis process includes:
1. Online meeting for a discussion and estimate.
2. Creating a virtual surgery arterial shape.
4. Computer simulation to calculate blood flow in the virtual vessel.
5. Report on the analysis.

First of all, please contact info@dev.cfd.life about the analysis contents. The steps are the following
1. Consultation and quotation by email or online meeting
2. Order
3. Sending the necessary data and analyze
4. We send a report

All you need to know is the shape of the vessel and the flow rate, and we will analyze each case manually, so we can use a variety of inputs such as CT, MRI, CAD models and drawings.
For analysis of actual cases, it is common to use CT for analysis.

The ability to accurately extract the shape of a vessel is important in CFD, and as a guide to image quality, the outline of a narrowed coronary artery must be visually identifiable.
Even if the image quality is poor, it is possible to modify the image based on the angiogram, so it is highly likely that analysis is possible even with an older 64-row device, for example.

We can provide virtual surgery technique that will provide useful information for comparing blood flow in multiple surgical techniques.

Please contact us for and we will introduce you to an introduction to Dr. Itatani. (Our software and services are for research purposes only, not for medical equipment, and we are not able to provide information on decision making in practice.)

We only provide contract analysis for simulations, which are custom-made, where a model is created for each customer's purpose, one by one. Numerical fluid dynamics simulations are technically difficult to perform, so our fluid dynamics experts analyze each case manually in order to provide a highly reliable analysis.

It is expected to be available soon as a beta feature in development.

Prices vary depending on the type of license. Please contact us to get a quote for your requirements.

Since the analysis results are limited to 2-dimensional cross-sections, the desired analysis results cannot be obtained if the characteristic flow, for example, the central axis of the stenotic jet is not captured in the cross-section.
On the other hand, it takes less time for acquisition.

It is possible. Energy loss and flow rate are analyzed in two-dimensional units.

It is available. We will be happy to meet with you online and explain how to install and use it. Please contact us at info@dev.cfd.life.

We will send you information on the recommended imaging methods. Please contact us at info@dev.cfd.life.
We provide support for the all the MRI maker according to recommended imaging methods.

The following conditions are recommended for cardiac imaging:
• Sagital
• Venc is 1.5 ~ 2.0m/s
• 4D Flow and Cine images for segmentation.
• Slice width: 4mm max
• More than 15 phases per cardiac cycle

Minimum:
OS: Windows 10 64 bit (Japanese or English)
Monitor resolution: Full HD (1920 x 1080 pixels) or higher
Interface: Mouse with wheels

Recommended:
CPU: Intel(R) Core(TM) i7-9700 or higher
RAM: 16GB or higher
GPU: NVIDIA GeForce GTX 1660 or higher

Analysis speed is CPU-dependent and less RAM means less stability.
We can also provide you an estimate for a recommended PC.

It is possible. If you have any concern, please tell us and we will check the compatibility. We will adapt the software for a better compatibility with your data.

Our iTFlow is unique in its ability to track and analyze beats without contrast. It can also calculate various hemodynamic indices based on fluid analysis techniques.

Demo and trial versions are available. We will support you in the interpretation of blood flow. In addition to 4D Flow MRI, we also provide comprehensive support for CFD and other methods of blood flow analysis, so please feel free to contact us if you have any technical problems.

It is possible to measure the average, maximum, and minimum values of stress in the measured area by enclosing it on the 3D screen.
It is also possible to draw the WSS in a cardiac cycle change’s graph.

4D Flow MRI data can be analyzed to visualize streamlines and pathlines, assess flow rates, measure cardiac volumes, measure energy loss, and analyze stress on the wall.